Home >> Heating Air Conditioning Portable Air >> Room Heaters, Space Heater, Wall Heaters, Portable and Utility Heaters >> Hotpod Duct Heater Connects To Wireless Remote
Hotpod Duct Heater Connects To Wireless Remote
An in-line duct heater is the most innovative way to heat cold rooms or home additions without expensive upgrades on installation of a new central system.
This products enables you to control the temperature of an individual bedroom or room. It works by using a heating element and built in fan to push warm air to a room. The internal fan can also deliver conditioned air from the main ducts to cool off a room. The Hotpod is simple to install. There is no difficult duct-work or wiring for installation.
The Hotpod is a low cost solution compared to traditional zoning. Use our optional wireless control for quick and easy control of the Hotpod unit.
• Fan only mode for increased cfm output for Air Conditioning cycles
• 6" 1000/500 Watt and 8" 1440/720 Watt models available
• 2 stage operation
• 120 Volt corded and hard-wire models available
• 10' Cord length on corded models
• Zero clearance for all models
• All models include UT8003 low voltage thermostat
• Optional wireless thermostat (select using dropdown above)
• Silent boot option available for rigid duct applications (Note: Silent Boot can only be used with rigid duct work)
Hotpod Models and Sizes:
HP6-1000120-2T, 6" Inlet Hardwire, 1000/500 Watts, 120 volts, Min Circ. Size 8.33, Temp Rise: 26, Wt. 4 lbs, RPM 1500, CFM 130, NEMA Plug N/A, 10.5" x 8.5" x 6"
HP6-1000120-2CT, 6" Inlet With Cord Set, 1000/500 Watts, 120 volts, Min Circ. Size 8.33, Temp Rise: 26, Wt. 4 lbs, RPM 1500, CFM 130, NEMA Plug: 5-15P, 10.5" x 8.5" x 6"
HP8-1440120-2T, 8" Inlet Hardwire, 1440/720 Watts, 120 volts, Min Circ. Size 12.6, Temp Rise: 23, Wt. 6 lbs, RPM 1500, CFM 210, NEMA Plug N/A, 11" x 10.5" x 8"
HP8-1440120-2CT, 8" Inlet With Cord Set, 1440/720 Watts, 120 volts, Min Circ. Size 12.6, Temp Rise: 23, Wt. 6 lbs, RPM 1500, CFM 210, NEMA Plug: 5-15P, 11" x 10.5" x 8"
Available Options: RF Kit-5 Wireless Thermostat and Silent Boot.
Do you turn up your heat in the morning for the whole house…just to have a warm bathroom?
When you leave home for vacation during the winter months, do you worry about “what if” the furnace fails?
Do you want to keep the baby or child's room at a warmer temperature, and the rest of the house cooler?
Now you can have a warm bathroom, a back-up system for the furnace and a consistently warm baby’s room by using the efficient and economical hotpod™!
This product will also allow you to save up to 50% on your heating bill by not heating the whole house just to heat up one or two rooms!
How Does hotpod™ Work and What is the hotpod™?
It is a device, installed in existing duct work, which will allow the homeowner to control the temperature of an individual room. Hotpod™ also comes with a Silent Boot™ that gives customers a premium, noise-reduced duct system.
The hotpod™ should be professionally installed by a local heating and cooling contractor in existing duct work, hard wired and controlled by a standard heating or cooling thermostat.
Heating is achieved by energizing the 1440w heating element and using its own internal fan to deliver warm air to the room.
Cooling is achieved by using the internal fan to deliver conditioned air from the main ducts and or other conditioned areas, until the desired temperature is reached.
IN-LINE ELECTRIC HEAT DUCT With cooling feature
• Air flow through design
• Quiet operation
• Selectable heating outputs
o One electric resistance heat element 720 Watts
o Two electric resistance heat elements 1440 Watts
• Easy Installation
• Silent Boot™ included with every hotpod™
• Integrated furnace control board
o Conformal anti-corrosion coating
o Heavy duty high cycle relays
o 24 Volt 10VA transformer
o Low voltage fused protection
• Self contained premium blower
o High efficient 32 Watt motor
o High temperature ball bearings
o 50,000 hour operation rating
o High temperature thermal plastic fan blades
• Premium safety discharge air limit
o 100,000 cycle rating
• Blocked airflow safety limit
• High gloss powder coat paint finish
• 24 Gauge galvanized spiral steel body
• Cast aluminum internal construction
• UL listed
• Assembled in USA
• 1 year limited warranty
DOWNLOAD Hotpod Specification
DOWNLOAD Hotpod Installation
DOWNLOAD Hotpod Wireless Thermostat
NOTE: For a complete standalone system, such as an addition or new construction where you don't need to install a hotpod into existing ductwork, the Hotpod can be purchased as a complete system with hotpod, remote and ductwork. See our accessory page to order the complete system.
Hotpod Duct Heater Connects To Wireless Remote