Airflow Breeze Ultra is the ultimate in vent cooling and heating! Deluxe Model With Remote Control.
Turn Problem Rooms Into Comfortable Rooms with the New AirFlow Breeze Ultra
Simply slide the AirFlow Breeze Ultra directly into a floor register opening. Fits registers measuring 6″x10″ or 6″x12″.
Do you have a “problem room” that is too hot or cold?
The temperature of a “problem room” fails to match the thermostat, so it’s chilly in winter or hot in summer–or uncomfortable in both seasons.
Problem rooms can have many causes, but often rooms distant from the central furnace/air conditioning unit are difficult to heat and cool effectively.
The AirFlow Breeze Ultra solves problem rooms by redistributing the air throughout your home as needed for better room comfort.
Sliding directly into a standard room register, the AirFlow Breeze Ultra pulls extra air from the duct to raise or lower the temperature of a room by 3-5 °F.
As a result, the AirFlow Breeze Ultra restores comfort to the vast majority of problem rooms – in both winter and summer.
Installation is a breeze!
Simply slide the AirFlow Breeze Ultra directly into a floor register opening measuring 6″x10″ or 6″x12″ and plug into a standard outlet – no further steps are required!
For wall and ceiling mounts, simply drill two screw holes and attach the AirFlow Breeze Ultra to the surface using standard screws. The AirFlow Breeze Ultra remote control allows for easy installation high or low on the wall, as well as in the ceiling.
The AirFlow Breeze Ultra may be powered either from the front or back with the included 6' power cord.
There’s no need to adjust the temperature of the whole house and waste valuable energy when you can solve your “problem room” with the AirFlow Breeze Ultra!
A register booster fan that costs only $5.00 per year to operate,the AirFlow Breeze Ultra pulls virtually free extra heat and air conditioning from your central air system!
It also typically eliminates the need for space heaters or room air conditioners, resulting in additional savings of energy and money.
AirFlow™ Breeze Ultra Size Dimensions are 13 7/8" x 7 5/8"
• Remote control operation
• Built-in temperature sensor
• Automatic ON/OFF function
• Whisper quiet, three-speed fans
• 12 month warranty
• Volts: 120 Vac to 12 VdcAmps: 0.70 A max
• Watts: 14
• CFM: 115 -150RPM: 1,200 to 1,800
• Sound 32-35 dBA level: (soft whisper)
• Patent Pending Question: Does the fan run all of the time or does it sense when the central air conditoning is running and then turns on?
Answer: The fan can turns on and off when the temperature hits the set point. Here is some additional information from the manufacturer. Mode Selections: • FAN (green) for continuous running • HEAT (red) for automatic ON/OFF to boost warm air • COOL (blue) for automatic ON/OFF to boost cool air IMPORTANT NOTES 1. Fan speed light will flash when fans are running. 2. Fan speed can be set at any time. Fans do not have to be running. 3. Numeric display will go out 30 seconds after SET POINT is completed. 4. The numeric display will only be active in the Heat or Cool mode. 5. The numeric display will come on in Heat or Cool if any button is pressed. 6. The numeric display exhibits an approximate room temperature for the purpose of programming the electronic sensor. 7. To shorten the length of time your Breeze Ultra runs after your forced air furnace or air conditioner has shut off a. for HEAT raise the SET POINT temperature b. for COOL lower the SET POINT temperature 8. If power fails or the Breeze Ultra is turned off the Ultra will automatically retain all settings.
Question: I have a register opening that is 14 by 6. Is there some type of mounting template that would make the AFN Ultra work in this size opening?
Answer: No, the largest we have is the 6x12". The actual cover is about 7.5" x 13.5" while the part that goes into the duct is 6"x12".
Question: Does the fan sense when the heat goes on? Does it run all the time the temperature in the room is less than the set point even if the furnace is not running?
Answer: http://www.aftproducts.com/368bf74b37_sites/aftproducts.com/files/Operation_Instructions_AirFlow_Breeze_Ultra.pdf
Question: I would like to install four of these units in a new construction between the floor with a Blaze King stove, which produces abundant heat, and the floor above with bedrooms. It appears they are DC with adapter, is it possible to prewire these so I do not have the wire coming off the unit?
Answer: The Ultra is powered from the back of the unit. The 12Vdc wire can be run through walls due to the low voltage. You can connect the power from the back of a wall outlet and run the 12Vdc wire to the fan unit. We have a 10’ extension cord that will facilitate a long run from a wall outlet to the fan. There are “low voltage” power accessories available at places like Lowe’s. They are usually located in the TV and audio hardware section. The hardware shown in the attachment is for low voltage applications such as wall mounted flat screen TVs and other audio equipment. While I understand the application listed below and many people have done this, it is important to mention that this installation should not be made in fire rated walls. Local building codes should be followed. For example, in states such as Massachusetts there are regulations that need to be followed.
Question: is this unit reversible? I want to blow air from near my woodstove into the basement below.
Answer: The manufacturer does not recommend that this vent fan be used for moving air from a hot stove.
AirFlow Ultra Register Booster Fan With Remote |